StaMixCo Products
 Injection Molding Mixing Nozzle & Filter (Type SMN/SMF)
The SMN Injection Molding Static Mixing Nozzle homogenizes molten polymer during injection.  It creates homogeneous melt flow plastics mixing with regard to colorant, additives and temperature.  This assures reduced spots, streaks and clouds of color; reduced colorant usage; and uniform parts as a result of mass and thermal homogenization.  The optional SMF Filter is installed to protect the hot runner system and mold when processing regrind materials by avoiding clogging and/or damage with debris carried along with the feed pellets (e.g., staples, dirt, aluminum debris).
more information...
 
Extrusion Melt Blender (Type SMB)
The SMB Extrusion Static Mixer Melt Blender creates high viscous mixing of the polymer melt just in front of the die. Three types of commercially proven static mixer designs are available depending on process requirements.  For high performance applications, the X-Grid crossing-bar static mixer designs create a very high degree of mixing in a short length.For medium performance laminar flow applications, the helical static mixer design creates a modest degree of mixing at a low pressure drop.
more information...
 
Double-Roof Disk Static Mixer (Type GXR)
The GXR Double-Roof Disk static mixer is an X-Grid crossing bar structure with an integral ring around the mixing element grid. It is used extensively for molten plastics injection molding and extrusion and for the processing of high viscous polymers and resins. The entire unit is of monolithic cast construction (single molten metal pour) which makes the unit virtually indestructible. The GXR is considered a high performance design that homogenizes viscous materials in a short length (Licensee of Bayer AG).
more information.
 
X-Grid Static Mixer (Type GX)
The GX static mixer is constructed of X-Grid crossing bars. It has been used successfully for over 25 years for the mixing and/or dispersion of viscous fluids. The GX static mixer is considered a high performance design that homogenizes viscous materials in a short length and is capable of mixing materials with equal or very large differences in viscosity and volumetric flow rates.
more information.
 
Corrugated Plate Static Mixer (Type GV)
The GV static mixer is constructed of offset-stacked corrugated plates. It has been used successfully as an inline mixer for over 35 years for the mixing of low viscosity liquids, gases, immiscible liquid dispersion and gas-liquid dispersion and contacting. The GV is considered a high performance design that homogenizes materials in a short length.
more information.
 
 Helical Twist Static Mixer (Type HT)
The HT Helical Twist static mixer is constructed of alternating-twist helical spirals.  This bowtie inline mixer pioneered the motionless mixing industry over 40 years ago and is used for the mixing of liquids, gases and slurries.  The HT static mixer is considered a medium performance design that is best suited for small diameter simple mixing and heat transfer applications.
more information...
 
Plastic Disposable Static Mixers
Plastic Disposable static mixers for 2-component (2K) resin systems are available in both high and medium performance designs. High performance designs are based on the X-Grid geometric structure where a high degree of mixing is achieved in a short length which is ideal for difficult applications. For simple applications, the cost effective industry standard helical twist design is best. Applications include the mixing of 2-component systems such as Epoxies, Urethanes, Liquid Silicone Rubber (LSR), Adhesives, Sealants, etc.
more information. ;
 
Heat Exchanger Static Mixer
The heating and cooling of viscous materials in laminar flow is greatly enhanced by the use of static mixers. Motionless mixing inserts placed in an empty pipe decrease the boundary layer at the empty pipe wall and increase heat transfer by a factor of three to six. Depending on process requirements, the heat exchangers are available in monotube and multi-tube configurations and with removable or fixed static mixing element types GX, GX-L or HT.
more information.
 
Plug Flow Reactor Static Mixer
Static Mixers create excellent radial mixing and plug flow conditions required to perform continuous chemical reactions with viscous materials. Reaction technology improvements include the product of reaction having a uniform history with regards to time, temperature, viscosity and molecular weight (narrow molecular weight distribution). Depending on process requirements, a typical small to medium size plug flow reactor is rack mounted and sometimes jacketed with removable static mixing elements type GX or GX-L.
more information.
Home | Principles of Operation | Products | Applications & Industries | Technical Information | About Us | Contact Us
Request A Quote | Mixer Selection Guide | Site Map


Mexico & South America: StaMixCo-Mexico; Geranios 26, J del Alba; C. Izcalli; 54750 Estado de Mexico; Tel: 52 (55) 2876 2311
USA & Canada: StaMixCo LLC; 235-84th Street; Brooklyn, New York 11209 U.S.A.: Tel: (718) 748-4600
Europe, Asia-Pacific, Africa: StaMixCo Technology Ltd.; Ebnetstrasse 8; CH-8474 Dinhard, Switzerland: Tel: +41 52 338 17 11

© 2008 StaMixCo, LLC. | Powered by Register.com